New bathtub spouts come with these specifications. Although you can cut a long pipe or add an adapter to a shorter one, buying the right size is just the right thing to do. Make sure that you buy a spout that will fit the size of the pipe you have on the wall. Twist it right and left as pull you it out. If the spout has been in there for a couple of years, it will not come out smoothly. If it is not coming out freely stop and make sure that the screw is completely loose. Grab the spout with both hand and pull it out gently.Note that you don’t have to remove the screw all the way out but you need to make sure that it is completely detached from the pipe to avoid burring it. Use the correct Allen wrench to screw out the screw from underneath the spout.Check if the spout is caulked to the wall.Plug off your bathtub drain to prevent anything from falling down the drain.A burred water pipe will often cause leaks. You must therefore be very careful while removing the old one to prevent damaging it.
Ideally, slip-on bathtub spouts are installed on a ½-inch water supply pipe (usually copper) which must be of the correct length and without dents/burrs. The only tool you need is an Allen wrench to loosen/tighten the screw. They are the easiest to remove and install. Slip-on bathtub spouts are connected to the water supply line using a screw at the bottom of the spout.
These type of style is very common in modern bathtubs or remodeled ones. These types of spouts do not have a knob at the top.Ī non-diverter bathtub spout is installed in bathroom with 2 faucets, one for the bathtub and the other for the showerhead. Non-Diverter bathtub spouts are installed in bathtubs where you only water to flow out through the spout, and never divert to the showerhead. While you can fix a stuck shower diverter, a replacement is usually the better and long term solution. If you have less than sufficient pressure in the pipe, you will notice that the shower diverter will not stay up, and you cannot take a shower.Īfter years of usage, mineral deposits, corrosions and debris embed on the spout causing the shower diverter to get stuck, and you cannot (or will struggle) to pull it up and down. The shower diverter is held in that position by the water pressure in the pipe. If you need water to come out through the showerhead you pull the knob up. When you push the knob down, the shower diverter is open, allowing water to flow out of the spout. There are grooves inside the spout which allow the shower diverter to move up and down. The little knob at the top of the spout is connected to another piece inside the spout that works like a gate. There is a knob at the top of the spout for diverting the water from the tub spout to the shower head. Diverter Bathtub Spoutsĭiverter bathtub spouts are the bathtub spouts you see in bathtub-shower-combinations. Some types of bathtub spouts like the threaded tub spouts have other categories that you need to know but we will get to that soon 1. Let us now look at the different types of bathtub spouts in more details. Buying any other type will simply not work. It is very important that you order the same type of spout as the one you have in your bathtub. You need to yo remove the spout to know if indeed you have an adapter or no. You can also use your finger to feel the groove where the screw is located.Ī bathtub spout with a brass adapter is not easy to identify. Grab a flashlight and check under and at the back of spout.
Seeing the screw under the tub might not be easy so you might need to bend and look keenly. If your spout is connected to the water supply pipe using a small screw underneath it you have a slip-on spout, otherwise you have threaded spout. Lack of a knob indicates that you have a non-diverter tub spout. If you see a small knob at the top of the bathtub spout, you have a diverter bathtub. Look for a little knob at the top of your spout, and then bend over to see if you will see a screw underneath it. A brass adapter is screwed, threaded or soldered to the pipe extending from the wall and then the spout is connected to the adapter. Diverter and non-diverter tub spouts are the easiest to tell apart.īrass-adapted bathtub spouts can either be slip-on, threaded, diverter or non-diverter.
These are:Ī diverter spout can either be a slip-on or threaded, and the same thing goes for non-diverter spouts. There are 5 main types of bathtub spouts. Removing and replacing a bathtub is a fairly simple process provided you have the right type with you. To do that you will first need to know the type of bathtub you have.īathtub spouts are categorized according to how they are installed, their appearance, how they are used, size and material used to make. Nonetheless, at one point or another you will need to replace it. A bathtub spout can last for many years depending on its quality among other factors.
0 kommentar(er)
